Rocker Guards...Rock Sliders...whatever you call them the bottom line is that you need them on your Jeep. Whether you run the Hammers in California, Harlan, Kentucky, or Rausch Creek in Pennsylvania, or just take your Jeep to the mall, the side panels of your Jeep are very vulnerable. Protect them with the ultimate solution---AtoZ Fabrication Rocker Guards!

AtoZ Fabrication TJ Rocker Guards start with the best materials--3/16" thick steel for the flat bases or 10-gauge diamond plate steel if you like that more. All rocker guard bases are cut to use flush mount hardware for snag-free wheeling as well as a clean, custom appearance. From there you can add steps, 1.5" round or 2" square--both with stand-offs welded in to make the outside of the step just over 3" for sure-footed access to your seat or roof as well as to help keep rocks and trees (and errant shopping carts)away from your beloved Jeep.

AtoZ Fabrication TJ Rocker Guards fit between the fender flares and cover 6.25" up the side of the rocker panel and 6.5" under the tub to protect as much as possible--and cover any existing dents or dings! There are no modifications necessary to be made to attach these to your Jeep other than drilling the holes for the hardware and the rocker guard fit is not affected by body lifts.

AtoZ Fabrication Rocker Guards include right and left guards w/round tube steps, body installation gasket and all included hardware is stainless steel and zinc coated for a corrosion free install. Rich Black Powder Coating Optional and may increase delivery times.